![]() After installation occurs, a qualified alignment facility is required to align the vehicle to factory.This lift is determined from the front while only lifting the rear to a position level with the front.If larger tires (10% more than stock diameter) are installed, speedometer recalibration is necessary. ![]() If any parts are found to be missing, contact your dealer as soon as possible. Please refer to Parts List to insure that all parts and hardware are received prior to disassembly of.Using a measuring tape, measure the front and rear (both sides)įrom the ground up to the center of the fender opening above the axle. ![]() Uneven (side-to-side) from the factory, but usually not noticed until a lift kit has been installed which Make sure you park the vehicle on a level concrete or asphalt surface. Reservations about installing this lift kit, call SKYJACKER® at 31 for Technical Assistance If any of these items are missing from this instruction packet, do not proceed with installation, but call SKYJACKER® to obtain needed items. Also affix the WARNING decal in passenger compartment inĬlear view of all occupants. * Metric and Standard wrenches and socketsīefore beginning the installation, read these instructions and the enclosed driver’s WARNING
0 Comments
Leave a Reply. |